Die russische 40 W - Sende-Pentode GU 50 (LS 50)

Diese Röhre ist eine Vergleichstype zur deutschen Senderöhre LS 50, sie heißt bei Oppermann GU 50 und kostet 4,50 DM / Stck.

Diese Röhre ist auch als High-End-HiFi-Endstufenröhre brauchbar, mit ihrer Leistung von 40 Watt ist sie durchaus im oberen Bereich anzusiedeln.



Hier ein Blick in's Röhreninnere.



Hier noch weitere Daten die ich im Internat fand:

GU-50
PENTODE
The GU-50 pentode is used as a RF oscillator and power amplifier in the metric wavelength range in RF equipment

GENERAL
Cathode: indirectly heated, oxide-coated.
Envelope: glass, no-base.
Height: at most 93.5 mm.
Diameter: at most 45.3 mm.
Mass: at most 100 g



OPERATING ENVIRONMENTAL CONDITIONS
Ambient temperature, °C -10 to +55
Relative humidity at up to +25 °C, % 98

BASIC DATA
Electrical Parameters
Heater voltage, V 12.6
Heater current, A 0.6-0.85
Mutual conductance (at anode voltage 800 V, grid 2 voltage 250 V, grid 1 voltage increment 5 V, anode current 50 mA), mA/V 3-5.5
Bias voltage at operating point, V 25-55
Penetration factor of grid 1 relative to grid 2, % 16-26
Interelectrode capacitance, pF:
input, at most 13-15
output, at most 10.3
transfer, at most 0.1
Output power, W, max.:
at anode voltage 800 V, grid 2 voltage 250 V, grid 1 voltage -100 V, anode current, at most 150 mA 55
over 1,750 h of service 40

Limit Operating Values
Heater voltage, V 11.3-13.9
Anode voltage at different wavelengths, V:
6.5 m or longer 1,000
6.5-4.5 m 800
4.5-3.5 m 700
3.5-2.5 m 600
Grid 2 voltage, V 250
Voltage between cathode and heater, V 200
Dissipation, W:
anode 40
grid 2 5
grid 1 1
Envelope temperature, °C 200


Averaged Anode-Grid 2 Characteristic Curves:
Uf = 12.6V; Ug2 = 250V; Ug3 = 0



Averaged Grid 2-Anode Characteristic Curves:
Uf = 12.6V; Ug2 = 250V; Ug3 = 0



Averaged Characteristic Curves:
Uf = 12.6V; Ug2 = 500V; Ug3 = 0